Collaborative Information Site

User Profile @diyobd2

follow: RSS


diyobd2's Posts - Page 3

VVDI Prog Read Benz EIS W203 1J35D/xJ74Y(MC69HC08AZ60)

V4.5.5 VVDI PROG Programmer is super programmer support read/write/save eeprom data.And VVDI Programmer  can get free BMW ISN read function and NEC, MPC, Infineon etc chip,if it support,the ISN will display automatically.

vvdi prog

Xhorse VVDI Prog Programmer will be a good tool to work with VVDI MB Tool,VVDI2 Key Programmer.And here is some steps about using VVDI Prog to read Benz EIS W203 1J35D/xJ74Y(MC69HC08AZ60).

1.Start VVDI Prog software,and choose the detailed type.

2.Click Connection Diagram,then it will display the diagram,please soldering like the pic shows:

vvdi prog benz w203

3.Use the MCU Reflash Cable V2,and do the diagram.Please do not forget the black color connection in the diagram,it is black color,not much obvious.

And in the diagram pic,it shows "Connect these pads"

vvdi prog w203

The connection cable of two points,the cable is 4 times of hair is OK,no need too long too thick,as it does not need too high voltage.

4.After connected well,click read on the software menu,and then save the data you hav

continue reading
3 visits |0 Comments|Reply

Free Download Ford KM Tool Can Bus V2.0 software

Xhorse Ford KM Tool Mileage Correction Kit CAN BUS V2.0 can support to read KM from car,write new KM into car.Which is a mileage tool especially for ford car models, support can bus protocols.

ford can bus km tool

1.Free Download Ford KM Tool Can Bus V2.0 software

Ford KM Tool Can Bus V2.0 software,if the update process is failed,you can get the software from download link to install:Ford KM Tool Can Bus V2.0 software

2.Ford KM Tool Supported car models:

CMAX Diag

EACAPE 2007-

FIESTA 2001-2007

FIESTA 2008-

FOCUS 2004-

GALAXY 2006-

KUGA DIAG

MAVERICK 2007-

MONDEO 2008-

MUSTANG 2007-

SMAX DIAG

www.xhorsevvdi.com all rights reservedOriginal Article url:Free Download Ford KM Tool Can Bus V2.0 software

continue reading
3 visits |0 Comments|Reply

VVDI Prog Programmer and Xhorse VVDI2 Key Programmer Comparison

VVDI2 is a comprehensive diagnose and programming tool (programming ECU and programming remote keys). VVDI Prog is like ecu programmer.For these two original Xhorse tools,XhorseVVDI.com will shware the comparsion about them.

1.VVDI Prog and VVDI2 Key Programmer Functions

VVDI2 is the update version for VVDI VAG Diagnostic, it inherited VVDI all features, mainly used to diagnose, programming ECU and keys and so on.

VVDI2 =VVDI options + BMW Multi Tool options + Porsche options + J2534(free)+ Tango(free) + Remote control generation(free)…..more other function will be added, the hardware and software can be updated by offical website (internet).

VVDI Prog programmer is famous Auto EEPROM MCU ECU programmer,VVDI PROG=(BMW ISN READ)+(EERPOM read)+(mcu read MOTO 9S12,5M48****)+PIN Code Calculation(more pin coder Algorithm ,than 40 type)

In short:

VVDI2 main function: vehicle diagnosis, odometer correction, ecu programming, remote key programming, key matching. e

continue reading
2 visits |0 Comments|Reply

What is difference of Xhorse MINI VCI and Copy MINI VCI Toyota?

Xhorse VVDI website sells original Xhorse Toyota mini vci single cable,but in the market,you can say different copy MINI VCI Toyota cables.What is the difference?How to choose the original one?

mini vci toyota

Xhorse MINI VCI Toyota firmware version: V2.0.4,but copy MINI VCI is V1.4.0

mini vci toyota

if you want to reset immo, or make customization to cars, need at least 2.0.1 Firmware version.

So with 2.0.1 FW there is change in PCB, as it support VPW, and has extra security chip

on the other hand, all these simple clones with 1.4.1 FW support only CAN and K line cars,

but VPW protocol is not supported in 1.4.1 FW, and there is no parts for it on PCB.

www.xhorsevvdi.com all rights reservedOriginal Article url:What is difference of Xhorse MINI VCI and Copy MINI VCI Toyota?

continue reading
2 visits |0 Comments|Reply

Xhorse VVDI2 BMW Key Programmer Feedback

 Xhorse VVDI2 BMW is BMW professional key programmer tool,and covers full functions of BMW Multi Tool,and which is better than BMW Multi Tool.Compared with BMW MULTI Tool,software and firmware both support upate,and can do CAS4+.

 

Xhorse VVDI2 BMW With Basic, BMW and OBD Functions Key Programmer Feedback:

Cars that I have successfully done with VVDI2

2005 BMW E87 CAS3

2006 BMW E90 CAS3

2003 BMW E60 CAS2

2010 Audi A5 with Keyless Entry

2011 Audi A3

2009 VW Golf mk6

I tested my vvdi2 on 2008 bmw m6 today. It worked flawlessly and was a bit quicker than multitool.

I did a perfect job on 2010 bmw X5 with ISTAP today. I downgraded CAS ( I backed up eeprom with xprog first) and then retrieved key info OK. Adding key was a brieze after that. Cleard all errors, sinchronized ELV. DONE

Hi i yesterday have bmw f10 2012 year ,read cas4+, change, write back all ok work .happy 100%

These feedback is from digital-kaos.co.uk forums,thanks f

continue reading
3 visits |0 Comments|Reply

How to install Nissan Consult 3 plus v65.21 on Windows XP

This is a how-to guide of a step-by-step instruction on Nissan Consult 3 plus v65.21 installationon Windows XP system.

First, you need a working Nissan Consult 3 plus software:

Download v65.21 Nissan C3+ software from diyobd2.fr

Crack!!

No pass!

Tested ok!

Safe to use!

Compatible device:

100 works no issue with Nissan Consult 3 plus  diagnostic tool

Operating System Requirements:

Windows XP SP2 Professional Edition operating system or higher

Installation Notes:

  1. Before installing the software, turn off the firewall, antivirus software, 360, etc.
  2. Software should be installed in C drive, and C drive must be "NTFS" format.

How to install Nissan Consult 3 plus v65.21 software:

  1. Run "start.html" by iexplore.exe;
  1. Run "C3PCheckLicense.exe" in folder "C3P License";
  1. Run "v80003T_20101215_x32.exe" to enable bluetooth;
  1. Run "Pplus_V51.1F.exe" in folder "ReprogramData".

Now, Nissan Consult 3 plus v65.21 works l

continue reading
2 visits |0 Comments|Reply

Tested XTOOL X100 PAD read Peugeot 308 Citroen C3 pin code easily

It’s tested easy to read out Peugeot 308 and Citroen C3 pin code by X100 PAD Key Programmer! Steps are easy even for car owner DIY repairing.

How XTOOL X100 PAD calculate Peugeot 308 security code?

First, connect X100 PAD with car via the Bluetooth VCI box. (Plug the VCI box into car OBD2 port then power on X100 PAD and connect the Bluetooth)

Next, turn car ignition on, go to main menu click “Immobilization” then select “Peugeot”.

 

Then, open latest software Peugeot V26.24 and choose “Read Security code” function.

Switch ignition off then click “OK” to continue.

Wait 12 seconds, press “OK” then turn on ignition immediately.

Then just follow the tips to turn ignition off and turn it on for several times. Wait the process complete to 100%.

XTOOL X-100 PAD successfully read out Peugeot 308 4 digit security code “MXCH”!

How XTOOL X100 PAD read out Citroen C3 pin code?

The procedure is mostly similar with the above, just ch

continue reading
9 visits |0 Comments|Reply

How to program Mercedes W221 BGA BE key by VVDI MB Tool?

posted by diyobd2 on Mar 26, 2017
tags: vvdi benz vvdi mb vvdi mb bga tool VVDI MB Tool

This is a tutorial to guide you: How use Xhorse VVDI MB Tool to program Mercedes BGA BE key for W221? Steps are as below:

 

First connect VVDI MB BGA Tool with car via OBD2 port.

Part 1: VVDI MB Tool calculate W221 BGA key password

Open VVDI MB Tool software, go to “Password Calculation”, select chassis “W221” then click “Data Acquisition”.

 

Follow the tips:

Insert a working key into ignition and wait 5 seconds→ take it out then insert it again→ insert it into the VVDI MB IR reader (the coil).

Data Acquisition is performing.

Insert the working key into ignition and wait 30 seconds.

Insert it into IR reader and wait the message show “Reading data success”.

After that, save the file, Data Acquisition finish!

Then click “Upload Data” and choose the file to open.

After upload success, click “Query Result” and click “OK” to continue.

Sometimes you must generate up to 6 files to get the password.

VVDI MB Tool s

continue reading
2 visits |0 Comments|Reply

Free Download V4.5.6 VVDI Prog Software (2017.03.21 Update)

V4.5.6 VVDI PROG Programmer newest software is released on Mar 21th.Here is the vvdi prog programmer software newest download link.

1.Free Download V4.5.6 VVDI Prog Software

Here is the download link:https://mega.nz/#!jpoEhToS!m9NoYIAhLhjLX-8imfQng7IQgwcGvVWFwxb7W_VlAL8

2. V4.5.6 VVDI Prog Update Informaiton

VVDI Prog v4.5.6 (2017-03-21)

* This version DON't need update firmware

* Fix some bugs

+ Add VVDI PROG USER MUNUAL 4.5.6 version in Doc folder

+ Support operate software while opening the diagram

* Fix MC9S12G192,MC9S12GA19,MC9S12G240,MC9S12GA240 options PFLASH write error problem

+ Add PIC12F635,PIC12F683 options in <2-MCU>-><MICROCHIP-PIC12F>

+ Add PIC16F631,PIC16F636,PIC16F639,PIC16F677,PIC16F684,PIC16F685,PIC16F687,PIC16F688,PIC16F689,PIC16F690 options in <2-MCU>-><MICROCHIP-PIC16F>

+ Add JIEFANG-J6-BCM option in <4-IMMOBILIZER>-><FAW> (Need to use with VVDI2)

+ Add FC-OPERATION-UNIT-W221 option in <8-OTH

continue reading
2 visits |0 Comments|Reply

Cummins truck CM2150C diagnostic test OK with Xtuner T1

posted by diyobd2 on Feb 27, 2017
tags: XTUNER T1 XTUNER T1 HD Scanner

Here, diyobd2.fr released a test report of the new Xtuner T1 truck diagnostic tool. It’s confirmed to work fine with Cummins CM2150C. Details as below...

Test purpose:

To confirm the functionality of Xtuner T1, check it’s working or not

Engine to test:

Cummins truck CM2150C

Scanner for the test:

Xtuner T1 truck

Tested functions:

Basic diagnosis (incl. Read/ clear faults, read data stream)

Activation test

Maintenance oil reset

Communication method in the test:

Obdii connection to the vehicle

WIFI connection to the PC and scanner

Test results:

Read/ clear faults......OK

Read data stream......OK

Activation test......OK

Maintenance oil reset......OK

Photos attached ...

Xtuner T1

CUMMINS CM2150Cengine

XTUNER T1 abilities for CM2150C Erase DTCs okRead DTCs successfully Perform anActuation Test ok

Data List

continue reading
3 visits |0 Comments|Reply
[]