Collaborative Information Site

Vvdi2 Key Programmer

How to use VVDI2 PSA Tool read pin code & add key for CAN line

VVDI2 Full package came with PSA Programmer and pin reader for a few days. And today, technicians in verified vvdi2 psa tool can read pin codes and do key learning with working keys on CAN based PSA- tested no issues.

1.VVDI2 PSA function:

VVDI2 PSA function only support CAN line protocol to add keys, learn keys and read pincode (with working key)

note: PSA change KM function will be added maybe in the near future.

PSA cars under PSA option, years, models, etc.:

CAN line protocol based Peugeot, Citroën and DS cars


2.How can i get VVDI2 PSA Software?Which VVDI2 includes PSA Software?

All VVDI2,includes VVDI2 full,VVDI2 VAG,VVDI2 BMW,even VVDI2 Basic,all has PSA software.

Start PSA icon in VVDI2 quick start software,then you can use PSA software function.


3.How to use xhorse vvdi2 for PSA key learning:

Just read the pin and cs from ecu.

Make backup from cluster, and the cluster configuration.

Then you make a dealer key, and learn it with pin.

tested mo

continue reading
2 visits |0 Comments|Reply

Xhorse VVDI2 "Non-standard upload data failed" Error

posted by obdii365 on Apr 19, 2017
tags: VVDI2 VVDI2 key programmer VVDI 2

VW polo 2014 with chip id 48 need to do add key.I tried to read pincode by choosing VVDI2 4th immo auto detect cluster diag the cluster turns black and back on but not possible a msg comes out says failed to connect try to cut power i unplugged the battery and tried again no success tried several choices also by key learn auto detect pincode also not possible any idea mates there is one option which is all key lost through OBD is is safe or it car may not start again ?? vvdi2-Non-standard-upload-data-failedLocksmith suggestion:

As far i know VW cars after 6.2014 are not possible to program keys .Could be too, 6FR is a Russian POLO cluster , difficult to work on it If you sure you choice right cluster type do it as below:Run VVDI2 key programmer software, choose correct cluster type , click READ IMMO (if you have working key) , if fail , close VVDI 2 , go to Log folder copy latest LOG (latest will contain only info from latest operation) and post it  to engineer to look if they can fix it or not. http://xhor continue reading
2 visits |0 Comments|Reply

VVDI Prog Programmer and Xhorse VVDI2 Key Programmer Comparison

VVDI2 is a comprehensive diagnose and programming tool (programming ECU and programming remote keys). VVDI Prog is like ecu programmer.For these two original Xhorse tools, will shware the comparsion about them.

1.VVDI Prog and VVDI2 Key Programmer Functions

VVDI2 is the update version for VVDI VAG Diagnostic, it inherited VVDI all features, mainly used to diagnose, programming ECU and keys and so on.

VVDI2 =VVDI options + BMW Multi Tool options + Porsche options + J2534(free)+ Tango(free) + Remote control generation(free)…..more other function will be added, the hardware and software can be updated by offical website (internet).

VVDI Prog programmer is famous Auto EEPROM MCU ECU programmer,VVDI PROG=(BMW ISN READ)+(EERPOM read)+(mcu read MOTO 9S12,5M48****)+PIN Code Calculation(more pin coder Algorithm ,than 40 type)

In short:

VVDI2 main function: vehicle diagnosis, odometer correction, ecu programming, remote key programming, key matching. e

continue reading
2 visits |0 Comments|Reply

Zed-Full and VVDI2 which is better for VAG & BMW?

posted by obdii365 on Mar 20, 2017
tags: VVDI2 VVDI2 key programmer Zed-Full

VVDI2 vs ZED-FULL key programmer which is better for VAG and BMW?

 Locksmith sugestion:

1:I have Zed-Full and to be honest it's a bit of a disappointment. Slow bringing out anything new on the VAG front. Older A3's and TT's never seems to be able to read the pin when other tools do fine. Not great on newer Marelli dash especially doesn't like the one in the VW UP. Never manages to read any CAS modules by OBD (used to ok but hasn't successfully read a single one for months) on top of that it's expensive to run.I'm about to order VVDI2 .



All these orignial tools are a pain sometimes, I have zed full for a few weeks can't say I'm impressed so far, So no joy on BMW CAS3+...


3:I have both, vvdi by far when it comes to VAG.


4:i have vvdi2 and autohex2 ,for the best is vvdi2 key programmer. Works perfect.



I have vvdi2 and zed full for vag and bmw vvdi2 is best for me.zed full is good too for other makes.

continue reading
3 visits |0 Comments|Reply

How to solve cannot find VVDI2 error

posted by obdii365 on Mar 02, 2017
tags: VVDI2 VVDI2 key programmer VVDI 2

Problem:When i connect the Xhorse VVDI2 key programmer with computer, however i click on any function, it just prompt “Can’t find VVDI2. Reconnect VVDI2 and try again”



Possible reason & solution:Software is not compatible with the hardware.

You’ve update VVDI2 firmware to V4.0.0, but software remain 3.0.3.

Software is too old to work with the newer firmware.

Keep your VVDI 2 software as new as firmware version. It will work.


How to update VVDI2 software & firmware

continue reading
5 visits |0 Comments|Reply